How do you turn off the door ajar on a 2003 Ford Explorer?

Disable the plug on the back gate in order to disable the door ajar alarm on the ford explorer. If inaccessible, a module may be located beneath the dashboard. You can disable the door ajar system in the ford explorer by unplugging the module located below the dash.

How do you reset the door ajar on a Ford Explorer?

Put the key into the ignition and turn it to the “II” position, taking care not to start the engine. Observe the instrument panel and wait for the door ajar light to go out. The light has been reset.

Why does my truck says door ajar?

Depending on the type of vehicle you have, your door ajar light can come on for any number of reasons: An electrical short in the dome light. An electrical short in the anti-theft system. A door switch stuck in the “open” position.

How do you turn off the dome light in a Ford Expedition?

To turn the interior lights off in a Ford Expedition You will have to locate the dimmer switch which is on the dashboard. You will have to turn it all the way off until You feel it click which is the off position. You will notice that some of the lights do not turn off and this is a safety feature for the SUV.

How do you turn off a door ajar light?

If you notice the door ajar warning light while driving, you should pull off the road as soon as it is safe to do so and try closing all your doors again. That should fix the problem.

How do you turn off the alarm on a Ford Explorer?

To reset the alarm on the Ford Explorer You have two options. You can pop the hood and disconnect the positive battery cable, then leave it off for about 30 minutes. This will make the power in the CPU drain, which will force the system to reset itself the next time it comes on.

How do you turn the interior lights off in a Ford Explorer?

You may also choose to open the hatch on the vehicle, then flip the rocker latch upward two times, until it clicks. You should then be able to use Your key fob to shut off all interior lights.

How do you know if your car door switch is bad?

Usually a bad or failing switch will produce a few symptoms that can alert the driver of a potential problem that should be serviced.

  1. Dome light does not come on. One of the most common symptoms of a possible problem with the courtesy light switch is an inoperable dome light.
  2. Flickering courtesy light.
  3. Dome light stays on.

By Other