How do I fix my DVD drive not opening?

Try shutting down or configuring any software programs that create discs or monitor the disc drive. If the door still does not open, insert the end of a straightened paper clip into the manual eject hole on the front of the drive. Close all programs and shut down the computer.

How do I open the CD drive on Windows XP?

How: Follow these step-by-step instructions:

  1. Insert your Windows XP CD-ROM into your CD or DVD drive.
  2. Open “My Computer” to find out the drive letter for the drive you are using.
  3. Click the Start button in the bottom left of your screen and then click Run.
  4. In the Open box, type cmd and then click OK.

Why is the DVD drive not working?

If the CD-ROM works in Safe Mode but not in normal Windows, a running program is causing the issue, or the drivers are corrupt. Open Device Manager, highlight and remove the CD-ROM by pressing the delete key. Windows should then detect the CD-ROM and reinstall it.

How do you eject a disc from an external drive?

Some external disc drives have an emergency pinhole used to force eject a disc stuck inside.

  1. Locate the pinhole on the front of the disc drive.
  2. Grab a pin, needle or uncoiled paper clip that fits into the pinhole.
  3. Insert the pin into the hole and push until the disc or tray pops out.
  4. It will only pop out a little.

How do I manually open my Samsung DVD player?

Hold the set, do not turn over the set ( the top cover keeps facing upwards ). There is a hole below the bottom chassis. This hole is used to eject the tray manually.

What would cause a DVD drive not to work?

Mechanical problems – Though not that common with DVD drives, but it is worth not ruling it out. Dirt, dried up lubrication, damaged parts are the main cause of mechanical problems that is associated with DVDs. When such problems occur you are likely to witness erratic problems or total failure.

Why is my DVD player not working on my computer?

To some degree, the issue of computer DVD player not working is simply related to the disc only, check whether your disc is damaged, for example. Discs are prone to damages such as scratches, dirt, and so on. Before inserting your discs to the computer, make sure that the disc is not damaged.

Why is my CD drive not working on my computer?

The most common cause of a CD-ROM drive to stop working is bad or corrupt drivers or a confliction between another running program. Often this issue is caused when your CD-ROM drivers are not loading properly into the computer or have been corrupted with other software. CD-ROM is not working in Windows.

Why is my DVD drive not responding?

Check the power supply. If the power supply is not providing enough power to the disc drive, it can cause the disc drive to not be able to function properly. The disc drive may not be able to read CD or DVD if it does not have enough power.

By Popular articles