How do I fix the alignment on my Lexmark printer?

Press OK again and an alignment will page print. Load plain paper….Solution.

Step Using Macintosh
1 Load plain paper.
2 From the Finder desktop, double-click the Lexmark printer folder.
3 Double-click the printer utility icon.
4 From the maintenance tab, click Print Alignment Page.

How do you fix a crooked printer?

If your printouts are slanted, try these solutions:

  1. Slide the edge guides against the edges of the paper.
  2. Select a higher print quality setting in your printer software.
  3. Align the print head.
  4. Make sure the product is not printing while tilted or at an angle.

Why is my Lexmark printer printing lines?

In most cases, vertical lines and streaks are caused by a leaking or malfunctioning toner cartridge. This is especially true if the streaks are of only one color. If none of the supplies are reading as low or exhausted, perform the steps in the table below. Enter the printer’s Diagnostic Menu.

How do you align print heads?

Aligning the Print Head Position from Your Computer

  1. Open the printer driver setup window.
  2. Click Custom Settings on the Maintenance tab.
  3. Switch head alignment to manual.
  4. Apply the settings.
  5. Click Print Head Alignment on the Maintenance tab.
  6. Load paper in the machine.
  7. Execute head alignment.
  8. Check the printed pattern.

Why does my printer print an alignment page every time I turn it on?

An ink cartridge alignment page prints every time you start a print job or turn on your printer. This issue usually occurs when a cartridge is replaced and the alignment process is not completed.

How do I calibrate my Lexmark printer?

Press until the check mark on the screen is next to Color Adjust. Press once more. The word Calibrating will appear on the printer display and the printer will begin calibrating the colors. When the calibration is finished, the printer will automatically return to the Ready state.

How do I clean the rollers on my Lexmark printer?

Step-by-step guide on How to clean Lexmark printer rollers

  1. Step 1 : Turn off the device.
  2. Step 2 : Open the printer.
  3. Step 3 : Remove the cartridge.
  4. Step 4 : Find the roller.
  5. Step 5 : Remove the roller.
  6. Step 6 : Wash with warm water.
  7. Step 7 : Reinstall the roller.
  8. You now know how to clean Lexmark printer rollers.

Why is my Lexmark printer printing faded text?

The print will appear light or faded on the page. There are several possible causes of this issue. In most cases, the toner cartridge is simply low on toner. If there is a Toner Low message on the printer screen, this is the most likely cause of the light print.

What does align print head mean?

Print head alignment corrects the installation positions of the print head and improves deviated colors and lines. This machine supports two head alignment methods: automatic head alignment and manual head alignment.

Is print head alignment necessary?

Perform the print head alignment procedure when you hear that scraping sound as the machine works so that you restore proper alignment before the print heads are irreparably damaged by this contact. It is also wise to run a print head alignment when you are changing from using thick paper to thinner paper.