How do I update firmware on Buffalo NAS?

Go to the Buffalo downloads page and enter your model number. Scroll to the firmware section and select the firmware update utility for Mac. Once the download finishes, click on the downloaded file in the downloads section of the dock. Double-click the “update” icon.

How do I reset Buffalo LinkStation?

The LinkStation will be restored to its factory default settings….Initializing from Settings

  1. In Settings, navigate to [System] – [Restore/Erase].
  2. Click [Restore LinkStation].
  3. The “Confirm Operation” screen will open. Enter the displayed number within 60 seconds, then click [Apply].

What is NAS Navigator2?

NAS Navigator2 is a utility program that makes it simple to display the Web Admin interface, change its IP address, or check its hard drive. If you installed the TeraStation with the TeraNavigator CD, NAS Navigator2 was installed automatically. Assigns all the TeraStation’s shared folders as network drives.

How do I reset my Buffalo external hard drive?

To factory reset your Buffalo drive:

  1. Turn off the LinkStation.
  2. Turn the LinkStation on with holding down the function button. The function LED will flash blue or white.
  3. Press the function button again while the LED is flashing. The status LED will flash blue or white.

How do I reset my Buffalo LinkStation admin password?

The following settings will be initialized: admin username, admin password, IP address, and Ethernet frame size….How to Reset the Password for the LinkStation.

1. Hold down the power button for three seconds to shut down the LinkStation.
2. Turn on the power button while holding down the function button. The function LED will flash blue for a minute.

How do I reset my Buffalo NAS admin password?

  1. Look for the Init button on back of device.
  2. Press and hold the red button for 10 seconds. The device will start beeping (no beep for LS-W TGL/R1). The password and IP address has been changed to default.

How do I reset my Buffalo TeraStation admin password?

Press and hold the “Init” button behind your TeraStation HD-H/HS-D device for 10 seconds. The Diag LED light will start flashing. The password is reset.

How do I map a Network drive in Buffalo NAS?

Mapping a Drive to a Buffalo NAS in Windows

  1. Open NAS Navigator.
  2. Right-click on the NAS.
  3. Select “Browse Shares” from the pop-up menu.
  4. Right-click on the shared folder you want to map to a drive letter.
  5. Select “Map network drive…” from the pop-up menu.
  6. Click on the drop-down menu to change the drive letter if desired.

How do I install a Buffalo NAS Navigator?

More videos on YouTube

  1. Download the latest version of NAS Navigator from the Buffalo downloads page.
  2. From the Dock, select the Downloads icon and open the nasnavi installation file.
  3. Click Install.
  4. Check the warning and click Open.
  5. Click Install NAS Navigator.
  6. Once the installation finishes, click OK.

What is Buffalo MiniStation?

Buffalo’s MiniStation™ Safe (HD-PNFU3 series) is a slim, SuperSpeed USB 3.0, portable hard drive that comes in a patented shock-proof chassis and features Buffalo’s new Lock-and-Go feature – thereby protecting your data in two important ways! MiniStation™ Safe is available with 1TB, or 2TB capacities.

How do I change the password on my Buffalo hard drive?

To reset your admin password, follow the procedure below….Resetting with the USB Drive.

1. Create a USB “password initialization” drive as described above.
8. Set the boot mode switch to “HDD” position.
9. Press the power button to start the TeraStation.

By Guidelines