Is 12mm plywood OK for flooring?

The cross-graining technique used in our 12mm ply improves strength, stability and prevents warping, making it excellent for bath panelling, wall lining floors and roofs. …

What is non structural plywood?

Plywood boards that meet structural standards have A-Bond types of glue bond. Non-structural plywood, on the other hand, falls under the C-D Bond. This means that the boards are produced from urea formaldehyde resin and is not suitable for structural as well as outdoor use.

What is 12mm plywood used for?

Applications of 12mm Hardwood Plywood It is typically used for general joinery, such as shelving, boxing in, fascias and soffits, and walkways.

What thickness does plywood come in MM?

Plywood thickness ranges from 0.4mm~100mm . But the common plywood is 3.2mm~21mm .

What are two disadvantages of using plywood?

Disadvantages & Limitation of Plywood

  • Urea and phenol formaldehyde used for gluing causes cancer.
  • Plywood is in many aspects weaker than wood.
  • Not durable like wood.
  • Not always easy to sculpture on this.
  • Lighter than normal wood.
  • Without some special resistance method maximum after long-term get attacked by insects.

What thickness of plywood is used for flooring?

The recommended thickness of the plywood subfloor is governed by the spacing of the joists. Some experts suggest that 15/32-inch plywood should be standard if the underlying floor joists are spaced 16 inches apart or less, but slightly thicker 3/4-inch plywood should be used for joists spaced further apart.

What can you use non-structural plywood for?

Non-Structural plywood can be used for decorative or curved finishes as wall panelling, ceiling linings, decorative displays or painted finishes. All plywood, particularly plywood used in external or semi exposed applications should be protected from weathering with the use of preservative treatments or coatings.

What size plywood should I use for furniture?

¾” plywood
Plywood for Furniture Most cabinet construction uses ¾” plywood, or else ½” plywood, which is usually less expensive, and makes the finished piece somewhat lighter. Lower grade veneers are fine for interior areas, where appearance is not so important.

What size is 11 32 plywood?


1/4-inch 11/32
1/2-inch 15/32
5/8-inch 19/32
3/4-inch 23/32

How many mm is 3/4 plywood?

Thickness in millimeters

Thickness (inch) Thickness (milimeter)
5/8” 15.9mm
3/4” 19mm
1-1/8” 28.6mm
1-1/4” 31.75mm

What are 3 disadvantages of plywood?