Was the Chrysler Turbine Car fast?
The engine produced 130 bhp (97 kW) at 36,000 revolutions per minute (rpm), 425 lb⋅ft (576 N⋅m) of torque, and idled between 18,000 and 22,000 rpm. At idle, its exhaust did not exceed 180 °F (82 °C). When driven at 120 mph (193 km/h), the turbine ran at its maximum of 60,000 rpm.
How fast could the Chrysler Turbine Car go?
It averages 107.8 mph, with a top speed of 142 mph.
How much horsepower does a Chrysler Turbine Car have?
130 horsepower
As mentioned yesterday, this A831 turbine engine makes 130 horsepower and 425 pound-feet of torque, and it’s hooked up to a conventional three-speed automatic transmission. It’ll run on just about anything combustible, from jet fuel to tequila.
How does Chrysler Turbine Car work?
Many remember the Chrysler Turbine Car, the bronze-colored hardtop that looked like a Thunderbird and whined like a banshee. Like a jet, the turbine’s basic element is a wheel ringed with blades or vanes; a fuel/air mixture flows past the vanes, causing the wheel to rotate and produce power.
Why don’t we use turbine engines in cars?
The main uses for gas turbines are in aviation and power generation. Aviation uses gas turbines for their high power to weight ratio. Power generation uses gas turbines for their high reliability / low maintenance, high maximum power and low capital cost. There is absolutely no reason to use gas turbines in cars.
Does Jay Leno own a Chrysler Turbine Car?
Jay Leno owns a Chrysler Turbine Car–one of only two running examples in private hands. Because he bought it directly from Chrysler, he is the first owner of the machine seen here: Number 34, according to a polished piece of trim located on the inner windshield trim.
How did Jay Leno get a turbine car?
How Fast Is Jay Leno’s turbine car?
This new turbine supercar runs on biodiesel and could theoretically top 245 MPH.
How fast is a jet engine car?
An arrow-shaped car designed to reach supersonic speeds — it’s outfitted with a jet engine and its own parachute braking system — just reached 501 mph (806 km/h) in tests in the Kalahari Desert in South Africa.
What ever happened to Chrysler’s Turbine Car?
After the conclusion of the user program in 1966, Chrysler reclaimed all of the cars and destroyed all but nine of them; Chrysler kept two cars, five are displayed at museums in the United States, and two are in private collections. Chrysler’s turbine engine program ultimately ended in 1979,…
How did the Chrysler Turbine Car work?
The turbine engines in the Chrysler fleet were designed to start with the operator not touching the gas pedal at all. The driver would turn the key and let the starter work its magic. The turbine would fire, spool up to speed, and then the car could be driven.
What vehicles are in Chrysler?
Chrysler, along with Dodge, Jeep, and Ram Trucks, is part of Fiat Chrysler Automobiles . Currently, there are just two Chrysler models, the 300 sedan and Pacifica minivan.
What is a Chrysler turbine engine?
Chrysler turbine engines. The Chrysler turbine engine is a series of gas turbine engines developed by Chrysler intended to be used in road vehicles.