What does code P0129 mean?

Barometric Pressure Too Low
OBD-II Code P0129 is defined as a Barometric Pressure Too Low. The engine control module (PCM) uses a Pressure sensor in the intake to determine airflow through the engine. If the PCM detects the signal is too low, it will set code P0129.

What causes a p0108 code?

The most common problem is a bad MAP sensor. The wiring or connector may be bad or have a bad connection, or could be too close to higher voltage consumption components, especially alternators, ignition wires, etc. which causes elevated voltage readings. A poor electrical ground can cause problems also.

What are the different types of PT Cruisers?

PT Cruiser models included the Classic Edition, Limited Edition, Touring Edition, Couture Edition (2010 only), “Dream Cruiser”, “Street Cruiser”, “Pacific Coast Highway Edition”, and PT Cruiser GT.

How much horsepower does a PT Cruiser make?

In North America, the front-wheel drive PT Cruiser is powered by a 2.4-liter, DOHC, 16-valve engine. The engine produces 150 horsepower @ 5,500 rpm and 162 lb. -ft. torque @ 4000 rpm.

Where is the barometric pressure sensor located?

Where are these Barometric Pressure Sensors located? Standalone BARO sensors are typically mounted on the firewall or the inside fender skirt. Late model BARO sensors are incorporated into the MAP sensor, and may be mounted on the intake manifold.

How do I know if my MAP sensor is bad?

What to look out for in a failing MAP sensor

  1. Rich air-fuel ratio: Look for rough idle, poor fuel economy, slow acceleration and a strong smell of gasoline (especially at idle)
  2. Lean air-fuel ratio: Look for surging, stalling, lack of power, hesitation on acceleration, backfiring through the intake, and overheating.

Why did PT Cruiser fail?

PT Cruiser problems with the engines The wireless control module (WCM) is the primary culprit. It’s reported to fail due to static electricity. Remedies were minor, including the WCM replacement.

Why was the PT Cruiser discontinued?

The paper reported Friday that the automaker will drop the line after the 2009 model year. The move comes as Chrysler executives consider killing slower-selling models to help the company return to profitability. Chrysler had said earlier this month that it would eliminate the PT Cruiser convertible.

What is wrong with PT Cruiser?

Some of the most common problems with the PT Cruiser involve the vehicle’s engine. In other cases rough idling or a faulty “check engine” warning light may occur. Stalling and difficulty starting are other common PT Cruiser engine complaints.