What drill bit is close to 9 16?

Drill Bit Hole Diameters
Metric Size Fractional Size
25 mm .9843 17/32

What can I use if I don’t have the right size drill bit?

The drill bit should be the same size as the shaft of the screw without accounting for the threads. To do this, simply line up a screw side by side with the drill bit. If they’re the same size, then you’re good to go. You can also look for the measurements labeled on most bits and screws.

What size is a number 16 drill bit?

Drill Bit Size Chart

Size Decimal Equivalent Size
69 0.0292 11/64″
.75 mm 0.0295 17
68 0.031 4.40 mm
1/32″ 0.0312 16

What size hole do you drill for a 9/16 bolt?

To Tap This Size Screw Or Bolt: Use This Drill Bit: (Closest Fractional:)
9/16-12 NC 31/64″ 31/64″
14mm-1.50mm 12.7mm
14mm-1.25mm* 12.8mm
9/16-18 NF 33/64″ 33/64″

What can I use if I don’t have a 5’8 drill bit?

If you break it down to 16th’s, 5/8ths is 10/16ths. So the next size larger would be 11/16th’s. If you want to stay in 1/8ths, than obviously it’s 6/8ths or 3/4″. If you break it down to 16th’s, 5/8ths is 10/16ths.

What is equivalent to a 9/32 drill bit?

Decimal-fraction equivalents

fraction in mm
9⁄32 0.28125 7.14375
19⁄64 0.296875 7.540625
5⁄16 0.3125 7.9375
21⁄64 0.328125 8.334375

What drill bit is closest to 5 16?

2583, which you then round up to the nearest drill bit size. In this case, the most relative drill bit size corresponding to the 5/16″-18 tap is 17/64, which corresponds to an F drill bit.

What can I use instead of 5/8 drill bit?

How big is a 9 / 16 in drill bit?

61ResultsBit Diameter: 9/16 in Sort by:Top Sellers Top SellersMost PopularPrice Low to HighPrice High to LowTop Rated Products Get It Fast In Stock at Store Today (5) Cumberland & nearby stores Free 2-Day Delivery (10)

Where can I buy drill bits for free?

Get free shipping on qualified 9/16 in Drill Bits or Buy Online Pick Up in Store today in the Tools Department. #1 Home Improvement Retailer Store Finder Truck & Tool Rental

What’s the size of a fractional drill bit?

In the following drill bit chart are the typical fractional sizes this kind of set would include. This would generally apply to many drill bit types, such as black oxide, titanium, carbide, high-speed steel and masonry (concrete), to name a few. Basic, twist-type drill bit sizes (fractional): 1/16″. 5/64″.

Can You size drill bit with hole card?

A drill bit size hole card can be very helpful for this. A simple plastic drill chart sheet with perfect round holes and markings on it lets you do a couple of things. First, you can size screws simply by inserting them into a hole then reading the marking. You can also size drill bits by pushing them through holes.