What is an Omex rev limiter?
The Omex Clubman rev limiter offers engine protection via a user definable engine speed cut. Selectable between either a soft or hard cut rev limit, the Clubman rev limiter reduces engine power safely to limit the engine speed thus protecting the engine from damage caused by over-revving.
Are Omex rev limiters legal?
The Omex product range is European Type Approved and therefore legal for road vehicles (e11 72/245-95/54-1573-00).
How do I set my Omex rev limiter?
To do this, turn the ignition on – but do not start the engine – then press and hold both buttons. Both LEDs will flash briefly. Release the buttons. The ‘+’ button will increase the rev limit by 100 RPM each time it is pressed and released.
Is a rev limiter launch control?
A rev limiter is there for your benefit. With the first rev limiter, the computer tells the engine to hold at a certain pre-set rev limit. This is designed to minimize wheel spin and get you moving down the road quickly from a stop. It’s launch control, and it’s a ton of fun.
Is hitting a rev limiter motorcycle bad?
Hitting the rev limiter occasionally wont do any harm. While over use of the rev limiter, over time will cause excessive valve wear, and possible valve failure over time.
Can you remove rev limiter?
How to remove the RPM limiter? This electronic command module which limits the RPM quantity in order to save your engine from being damaged cannot be physically removed. However, you have the possibility to change the ECU stock with a high performance ECU. This process will authorize you to go beyond the RPM limits.
Is 2 Step A launch control?
Two-step is also known as a stutterbox and is a form of launch control. Essentially two-step works as a secondary rev limiter. Two-step works off of your speed sensor so it knows when you’re moving and when you’re not.
Should I remove the rev limiter?
To avoid any risk of damage to your vehicle, it is strongly recommended to remove the RPM limiter physically. To do this, replace the factory default ECU with a high-performance ECU in order to exceed the original limits placed on the RPM.
Is it bad to hit the rev limiter?
The rev limiter does not hurt your engine, but bouncing the car off the rev limiter continuously is not a good idea either. If you hit the rev limiter before you shift it slows your run and wastes fuel.
Is hitting rev limiter bad?