What is IC 74155 demultiplexer?

IC 74155 is a dual 1:4 line demultiplexer with individual strobe inputs. It has common binary address inputs (A, B and C) and it is available in single 16 pin package. the data applied to input IC is inverted at its output and that applied at pin number 15 is not inverted through the output.

What is the output of IC 74155?

IC 74155 is a dual 1:4 line demultiplexer with individual strobe input. It has common binary address inputs (A,B and C) and it is available in single 16 pin package.

How can IC 74138 be used as demultiplexer?

74LS138 is used in de-multiplexing applications by using enable pin as data input pin. Also the chip inputs are clamped with high-performance Schottky diodes to suppress line-ringing and simplify system design.

What is the function of IC 74138?

74138 is used to generate chip signals.

What is IC 74153?

74153 is a data multiplexer or data selector IC. It has inverters and drivers that supply fully complementary data selection to the AND-OR-NOT gates. It also has on-chip and binary decoding. It has 2 1 of 4 data multiplexer in one IC package. Separate data enables are available for each multiplexer.

What is IC 74150?

This Integrated circuit has active LOW. ENABLE input and gives complementary outputs. IC 74150. Figure below shows the 16-to-1 multiplexer Integrated circuit of TTL family 74150. This multiplexer has active LOW ENABLE input and active LOW output.

What is IC 74151?

The TTL/MSI SN54/74LS151 is a high speed 8-input Digital Multiplexer. It provides, in one package, the ability to select one bit of data from up to eight sources. The LS151 can be used as a universal function generator to generate any logic function of four variables.

Which IC used for decoder?

3 to 8 line decoder IC 74HC238 is used as a decoder/ demultiplexer. 3 to 8 line decoder demultiplexer is a combinational circuit that can be used as both a decoder and a demultiplexer. IC 74HC238 decodes three binary address inputs (A0, A1, A2) into eight outputs (Y0 to Y7). The device also has three Enable pins.

What is IC 74139?

74139 is a high speed dual 2-to-4 line decoder IC. The IC is designed with Schottky-clamp circuits to use in high-performance memory-decoding and data-routing applications, requiring a very short propagation delay time. The active-low enable input can be used as a data line in demultiplexing applications.

Which IC is used for multiplexer?

List of ICs which provide multiplexing

IC No. Function Output State
74×352 Dual 4:1 mux. Output is inverted input
74x151A 8:1 mux. Both outputs available (i.e., complementary outputs)
74×151 8:1 mux. Output is inverted input
74×150 16:1 mux. Output is inverted input

How many multiplexers are there in IC 74153?

The integrated circuit 74153 contains two 4-way multiplexers with common A and B selection inputs. Each multiplexer has a validation input G (STROBE).

What is multiplexer IC?

A Multiplexer IC allows you to interface a number of pins, with a single pin, by using a set of state pins to determine which ones are connected. e.g. you could have 8 LEDs as Outputs, all controlled from a single output. You could also have 8 different switches as Inputs, which are all interfaced to a single input.