What is the best cut for body armor?
The two most common cuts for body armor plates are the Shooter’s Cut and the Swimmer’s Cut. Despite offering similar protection levels against the same type of round, there are a few distinct differences between both to keep in mind.
What is AR550 rated for?
With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109, and 7.62 x 51 (. 308 Winchester) at a rated velocity of 3,100 fps or less.
What will AR550 stop?
Our AR550 body armor is special threat tested up to level III+ and our AR550 plates are NIJ . 06 certified Level III are designed to stop six spaced hits of 7.62x51mm NATO FMJ M80 at a velocity of ~2780 ft/s.
What does swimmers cut mean?
Swimmers Cut: These plates have a larger cut in the shoulder to increase mobility and range of motion while decreasing the total weight. Body armor plates with a swimmers cut will protect your heart and lungs, but decrease coverage for surrounding organs.
Is Sapi cut the same as shooters cut?
What is the difference between Shooter’s Cut & SAPI/ESAPI cut? The SAPI/ESAPI cut is the more traditional body armor shape, often found in military armor systems. For comparison with a 8″x10″ plate, the area of the Shooter’s cut is about 2.22″ x 4.45″ and the area of the SAPI/ESAPI cut is 1.81″ x 2.61.”
What does SAPI body armor mean?
Small Arms Protective Insert
The Small Arms Protective Insert (SAPI) is a ceramic trauma plate used by the United States Armed Forces. It was first used in the Interceptor Body Armor, a ballistic vest. To protect against higher-velocity rifle rounds, SAPI plates are needed.
Is AR550 armor good?
AR500 body armor is the standard for most operations, although AR550 body armor’s core hardness is 10% more than our AR500 plates, making this ballistic grade steel much harder than AR500 without causing severe stress while forming. AR550 body armor is some of the highest quality armor around.
What is the highest level body armor?
Level IV armor
Level IV armor is the highest rating of body armor currently available, and it will stop armor-piercing rifle threats. It can withstand up to 30-06 M2ap steel core armor-piercing rounds with a mass of 166 grains and a velocity of 2880 ft/s.
What can level 3 armor stop?
Level/Type III Body Armor Level III will stop the majority of all 5.56mm and 7.62mm bullets, but will not defeat military-grade armor-piercing ammo. For example, a NATO M855 5.56 x 45mm bullet with a 62-grain steel core will defeat a Level III armor system.
Whats the difference between Sapi and shooters cut?
Shooter’s cut (also known as Swimmer’s cut) is designed for an active shooter because it allows the wearer to shoulder their rifle with improved comfort and positioning without vital coverage loss. The SAPI/ESAPI cut is the more traditional body armor shape, often found in military armor systems.
What are the different types of armor cuts?
Hard armor is usually referred to as “plates”, these plates come in different types of cuts: Full Cut, Shooters Cut, Swimmers Cut and Small Arms Protective Insert (SAPI). Unfortunately, considerations for which cut is needed is something that is often not thought about or not learned until it is too late.
What do you need to know about body armor?
Selecting the correct body armor size, cut, material, and plates level is an essential step in purchasing ballistic plates to go with your plate carriers. This determines the level of protection, coverage, and mobility during combat or dangerous situations.
What’s the best way to cut cable in armor?
Place a saw blade at a 45-degree angle to the armor and begin sawing. You should place the saw blade on the armor where it’s beginning to pop up. Then gently pull the blade back and forth across the armor until it just cuts through. Be careful not to cut through the wires. Rotate the cable so you can cut through the other side.
Where can I buy body armor in Connecticut?
Sales people looking to purchase body armor in Connecticut can do so only through face to face transactions. Body armor can be sold to anyone in face to face to transactions. There is no need for background check or ID and no need for special permits. Body armor can be sold at gun shows, stores, websites, through catalogs, or over the phone.