What is the keep out layer?
Where the mechanical layer defines the physical boundaries of your board, the keep out layer specifies constraints on the working area of your design. For example, you may want all components drawn back 1/2 inch from the perimeter of your board, the keep out layer will constrain your design in this manner.
What is keep out area in PCB?
A PCB keepout is an area on a circuit board set aside by the designer where no external components, copper traces or other board elements should enter into or cross. This area may be or contain copper and can be of any shape.
How do I keep a layer out in Altium?
In the PCB Editor – place a region keepout in the following ways:
- Click Place » Keepout » Solid Region from the main menus.
- Click the button in the graphic objects drop-down on the Active Bar menu located at the top of the workspace. (Click and hold an Active Bar button to access other related commands.
What is Route Keepout?
Route Keepout – User-defined polygon that prohibits all etch, vias, and shapes (copper pours). Defined for top, bottom, or both layers at once. Package Height – Attached to a Package Keepout area.
What is PCB outline?
This board outline gerber file is used to determine the extents of your PCB, calculate the size of your PCB, and remove excess features of your PCB that extend past this border. The PCB fab uses the board outline gerber file to route out your PCB and determine where slots and other cutouts should go.
What is keep out layer in Altium?
Summary. A keepout is the name given to an object that blocks or prevents the placement of copper objects within an area. A keepout can be defined as a fence (in essence, a wall around the area to be protected) or they can be defined as a solid area of keepout that completely covers the area to be protected.
What is Keepout layer Altium?
A Keepout in PCB design is a user defined area or perimeter placed in the layout that copper objects cannot intersect. In the PCB Editor (and PCB Library Editor), objects assigned as Keepouts are indicated by the current Keep-Out layer color.
How do you draw a board outline in Altium?
Enable the Include Cutouts option if the board has cutouts in it. Enable the Route Tool Outline option. When this option is enabled the line/arc objects are placed so their edge touches the edge of the Board Shape and the edge of the cutout. Click OK to create the Route Tool objects on the chosen mechanical layer.
How do I make a board cutout in Altium?
A board cutout can be placed anywhere in the Board Shape. To place a cutout, switch to view the board in 2D Layout Mode then use the Design » Board Shape » Define Board Cutout command from the main menus (alternatively, you can also use the Place » Define Board Cutout command in Board Planning Mode).
What can you use trace and detach for?
“Trace and Detach” works like a cookie cutter and punches out the traced image. All of these methods come in handy for printing and cutting stickers, cake toppers, and anything else you want to cut in one piece. Now I can cut out the design and use Silhouette Heat Transfer Material to make him a t-shirt or pillow of his very own monster.
Which is the best type of trace antenna?
When implementing a trace antenna keep in mind these 7 Keys to make your antenna design flawless. Standard designs that are widely available include monopole, L-type and F-type. Standard F-type antennas are the most extensively used and offer the best trade-off between size, efficiency, and are fairly omni-directional.
What’s the difference between trace outer edge and detach?
“Trace Outer Edge” traces just the outer edge. “Trace and Detach” works like a cookie cutter and punches out the traced image. All of these methods come in handy for printing and cutting stickers, cake toppers, and anything else you want to cut in one piece.
How to use the trace tool in Silhouette Studio?
There are three ways you can apply the Trace tool: Selecting “Trace” will cut all of the edges inside and outside of the image “Trace Outer Edge” traces just the outer edge. “Trace and Detach” works like a cookie cutter and punches out the traced image.