What size is 6 32 in MM?
Tire Tread Depth Conversion /32″, Inch, MM
| Fraction /32″s | Inch | MM |
|---|---|---|
| 6/32″ | 0.188 | 4.76 |
| 7/32″ | 0.219 | 5.56 |
| 8/32″ | 0.250 | 6.35 |
| 9/32″ | 0.281 | 7.14 |
What is the standard equivalent to 33 mm?
SAE to metric wrench and spanner converter chart
| Standard SAE US Wrench/Spanner Size (inches) | Metric Wrench/Spanner Size (mm) |
|---|---|
| 1 1/4 | 31.75 |
| 32 | |
| 33 | |
| 1 5/16 | 33.34 |
What thread size is 6 32?
0.1380 inches
The #6-32 UNC is a UTS screw specifying a major thread diameter of #6 which is defined as 0.1380 inches (3.51 mm); and 32 tpi (threads per inch) which equates to a thread pitch of 0.031250 inches (0.7938 mm).
What is the equivalent of 32 mm?
Metric / Standard Wrench Conversion Chart
| Bolt Diameter | Metric | Standard |
|---|---|---|
| 32mm | 1-1/4″ | |
| 7/8″ | 34mm | 1-5/16″ |
| 35mm | 1-3/8″ | |
| 1″ | 38 mm | 1-1/2″ |
What size is 3/32 in MM?
Fractional Inches to Decimal Inches and Metric Millimeters
| Inches | Metric | |
|---|---|---|
| Fractional | Decimal | mm |
| 3/32 | 0.0938 | 2.3813 |
| . | 0.0945 | 2.4000 |
| . | 0.0984 | 2.5000 |
What size is 5 32 in MM?
SAE to Metric Conversion Chart
| SAE | Metric | Inch |
|---|---|---|
| 5/32″ | 0.156 | |
| 4mm | 0.157 | |
| 4.5mm | 0.177 | |
| 3/16″ | 0.188 |
What size is 9 32 in MM?
SAE to Metric Conversion Chart
| SAE | Metric | Inch |
|---|---|---|
| 6.5mm | 0.256 | |
| 7mm | 0.276 | |
| 9/32″ | 0.281 | |
| 5/16″ | 0.313 |
What is the thread conversion table for UNC?
Thread Conversion Table Metric Coarse Metric Fine BSF/BSW UNC UNF M8 x 1.25 M8 x 1 5/16″ 5/16-18 5/16-24 M10 x 1.5 M10 x 1.25 3/8″ 3/8-16 3/8-24 M12 x 1.75 M12 x 1.25 1/2″ 1/2-13 1/2-20 M14 x 2 M14 x 1.5 9/16″ 9/16-12 9/16-18
What does the Unified National Coarse thread mean?
Unified National Coarse Thread | UNC Thread The Unified Thread Standard (UTS) defines a standard thread form and series along with allowances, tolerances, and designations, for screw threads commonly used in the United States and Canada.
Is the UTS the same as the ISO Metric thread?
It has the same 60 °profile as the ISO metric screw thread, but the characteristic dimensions of each UTS thread (outer diameter and pitch) were chosen as an inch fraction rather than a millimeter value. The UTS is currently controlled by ASME/ANSI in the United States.
Which is better UNC UNF or UNC m2?
Thread Conversion Table Metric Coarse Metric Fine UNC UNF M2 x 0.4 – 1-64 1-72 M2.5 x 0.45 – 3-48 3-56 M3 x 0.5 – 4-40 4-48 M3.5 x 0.6 – 6-32 6-40