How do I install Epson TM u220b Ethernet?

Setting up an Epson TM-U220 LAN kitchen printer (for iOS device)

  1. Verify hardware requirements.
  2. Connect the printer to a power supply.
  3. Insert an ink ribbon cartridge.
  4. Insert a paper roll.
  5. Connect the printer to your router.
  6. Print a status sheet.
  7. Connect the printer to your network (for older printer models only)

What is UIB Epson?

UIB (Universal Interface Board) standard compatible. Supports TCP/IP protocol. Compatible with OPOS, JavaPOS, and APD. Configure with web browser or USB cable. ( USB connection is available only for setting parameters)

How do I install a POS on a network printer?


  1. Download and run the POS-X impact printer driver.
  2. Click Next.
  3. Check the box labeled DOT IMPACT PRINTER, then click Installation.
  4. From the Printer Port menu, select TCP/IP.
  5. You may set the printer as the default printer if you desire; when prompted to reboot, do so.

How do I find my Epson TM T88V IP address?

Q: How to check the IP and MAC Address of the Epson Printer? Print

  1. Load paper, and then turn the printer on.
  2. While pressing the Feed button, turn the printer on.
  3. Release the Feed button when it start to print.
  4. Locate the IP and MAC address on printed paper. See below sample print out.

How do I connect my Epson printer to my network receipt?

Add Port & Install Printer

  1. Ensure your receipt printer is connected to the network and it is powered on (you should see a blue light)
  2. Use the Windows search bar to find the EPSON configuration utility by typing the Epson model name such as Epson TM-M30 Utility and click the application to open.
  3. Click Add port.

How do I set up my Epson TM T88VI printer?

Follow the steps below when setting up your Epson TM-T88VI LAN receipt printer:

  1. Verify hardware requirements.
  2. Connect the printer to a power supply.
  3. Insert a paper roll.
  4. Print a status sheet.
  5. Connect the printer to your network.
  6. Add the printer to Lightspeed Restaurant.
  7. Test print a receipt.

How do I install Epson TM T88V USB?

How to Activate the USB port on an Epson TM-T88V

  1. Power off printer.
  2. Power printer on while holding the feed button until the printer starts printing a self-test.
  3. After the self-test prints, hold the feed button for a couple of seconds and a menu of options will print.

How do I find the IP address of my kitchen printer?

Press and hold the feed button. Power the printer on and continue to hold the feed button. After a few seconds a settings sheet will print including the IP address of the printer.

How to convert an Epson U220 printer to Ethernet?

To convert an Epson U220 model printer you will need an Epson compatible Connect-IT interface card. You can then self-test the printer to see if the Serial interface has been changed. If the interface still says “Serial”, set 2-4 to OFF and set 2-8 to ON. You can then power off printer and perform another self-test.

What does the Epson UB-IDN interface card do?

Micros Epson UB-IDN Card. The UB-IDN interface card provides a large input buffer to the printer so that printer operations don’t slow down the host terminal. A soft host interface utility is available from Micros to allow host interface communication perimeters to be changed from the host PC.

How to add wireless to Epson tm-t88vi printer?

Add wireless capability to Epson TM-T88VI , m30 and H6000V via USB dongle. Configure with web browser or USB cable. Install information.. Install information..

How does an Epson Connect-IT interface card work?

Epson Interface Cards Install information.. Uses a standard Centronics 36 pin connector to connect to the parallel port on the host system. Install information.. Install information.. Install information..