How do I reset my Maytag refrigerator after a power outage?

Reset the refrigerator

  1. Power unit down by turning off the circuit breaker(s) or unpluging the product for 5 – 10 minutes.
  2. Power unit up by turning on the circuit breaker(s) or plugging the product back in.
  3. Ensure the cooling function is turned on.
  4. Test the control panel functionality.

Where is the refrigerator reset button?

It is usually in the middle of the back panel or at the top of the refrigerator in a panel above the upper shelf. Make small changes in the temperature or you may run the risk of freezing the contents of the fridge.

How do you put a Maytag refrigerator in diagnostic mode?

Enter the Service Test Mode by performing the following sequence of events.

  1. Open the Fresh Food door and press and hold the Door Alarm keypad DoorAlarm .
  2. Press and hold Refrigerator Temperature UP keypad .
  3. Release the Door Alarm Keypad DoorAlarm and wait 3 seconds.
  4. Press the Refrigerator UP Keypad again.

Why is my Maytag refrigerator not cooling?

Check the condenser coils to determine if they are dirty—if the condenser coils are dirty, clean them. The condenser fan motor draws air though the condenser coils and over the compressor. If the condenser fan motor is not working properly, the refrigerator won’t cool properly.

Will unplugging a fridge reset it?

Unplug the appliance from the wall socket for 30-45 minutes, then plug it back in. This will reset the device and in some cases it may be enough to completely fix the problem. If a hard reset did not solve the problem, measure the fluid temperature.

Where is the reset button on a refrigerator?

It is usually in the middle of the back panel or at the top of the refrigerator in a panel above the upper shelf. Make small changes in the temperature or you may run the risk of freezing the contents of the fridge.

Is there a way to Reset my Refrigerator?

There is no reset button on a refrigerator,but there are many things that can keep it from cooling. There is not a reset button on most models of refrigerators. Unplugging the refrigerator for several minutes and then plugging it back in will sometimes reboot the electronic control board on the refrigerator (if it has a control board).

How do you reset a Frigidaire refrigerator?

Release the control lock by pressing the “Control Lock” icon for three seconds. A beep will sound, and the icon’s light will go out. Power Reset ·A power reset is occasionally necessary if the Frigidaire refrigerator’s control panel does not work normally or a reset function on the keypad does not work.

How do you reset the refrigerator?

The only reset for this refrigerator is to press and hold the upper right and upper left buttons on the dispenser control panel for 5 seconds.

By Questions and answers