How do you calculate Reid Vapor Pressure?

programmed correction factor. RVP psi = (0.956 * X)−0.347. 2.39 where: X = total measured vapor pressure in psi or kPa 9.3Record the RVP to the. nearest 0.01 psi (0.07 kPa) as the official test result. 9.4EPA will use the above method as the official vapor pressure test.

What is Reid Vapour pressure of gasoline?

Volatility is the property of a liquid fuel that defines its evaporation characteristics. RVP is an abbreviation for “Reid vapor pressure,” a common measure of and generic term for gasoline volatility. Depending on the state and month, gasoline RVP may not exceed 9.0 psi or 7.8 psi.

What is the difference between vapor pressure and Reid Vapor Pressure?

True Vapor Pressure is the pressure of the vapor in equilibrium with the liquid at 100 F (it is equal to the bubble point pressure at 100 F). Reid Vapor Pressure is the vapor pressure of a chilled sample of gasoline or other fuel as measured in a test bomb at 100 F.

What is the Reid Vapor Pressure of diesel?

The volatility of a fuel can be estimated using the values of the so-called Reid vapor pressure (RVP) [36], which is the pressure of a fuel vapor at 37.8°C (100°F). For gasoline, the RVP values typically range between ∼ 50-113 kPa [37, 38] and for diesel fuel ∼ 0.2-0.7 kPa [38,39].

What does high Reid vapor pressure mean?

Higher RVP means the fuel forms more vapor… in other words, more fuel evaporates at 100F. Obviously, a lower RVP indicates less fuel evaporates at 100F.

What is the significance of Reid Vapor Pressure?

The Reid vapor pressure test is used to determine the front-end volatility of products in the gasoline through heavy reforming naphtha boiling point range. It correlates with the normal butane content of the sample and the RVP of gasoline blends is adjusted by adding or removing normal butane.

Does RVP blend linearly?

The RVP of hydrocarbons and oxygenates should actually blend very linearly, with the exception of the lighter alcohols, methanol and ethanol.

What is the fuel vapor rule?

This process takes the vapors normally emitted directly into the atmosphere when pumping gas and recycles them back into the fuel storage tanks, preventing them from polluting the air. The Stage II system controls the release of VOC, benzene and toxics emitted from gasoline.

What is the concept of vapor pressure?

The vapor pressure of a liquid is the point at which equilibrium pressure is reached, in a closed container, between molecules leaving the liquid and going into the gaseous phase and molecules leaving the gaseous phase and entering the liquid phase.

Why is butane added to gasoline?

When blending into gasoline, butane is favored for its high octane but limited by its high vapor pressure. As a commercial finished product, butane is used as a home heating fuel, as cigarette lighter fluid, as a refrigerant gas, and as a propellant, but all of these require in fairly small volumes.

How do you calculate Ron?

RON is determined by running the fuel in a test engine with a variable compression ratio under controlled conditions, and comparing the results with those for mixtures of iso-octane and n-heptane.

Which system of vapor recovery is being phased out?

The phase-in of ORVR controls has essentially eliminated the need for Stage II vapor recovery systems. As such, EPA Region 1 has been working with the New England States as they strive to address State legislation and/or revise State regulations aimed at phasing-out Stage II vapor recovery programs.

What is Reid vapor pressure (RVP)?

Definition – What does Reid Vapor Pressure (RVP) mean? Reid Vapor Pressure is the pressure exerted by a liquid to calculate the volatile nature of gasoline. The pressure is exerted at a specific temperature, that is, 100 degrees Fahrenheit . It is determined by a test known as ASTM-D-323.

What is Reid vapor test?

Reid vapor pressure ( RVP ), determined by the ASTM test method D323, is widely used in the petroleum industry to measure the volatility of petroleum crude oil, gasoline and other petroleum products.

What is Reid pressure?

Reid vapor pressure . Jump to navigation Jump to search. Reid vapor pressure ( RVP ) is a common measure of the volatility of gasoline and other petroleum products.