How do you measure a sink strainer plug?

Answer: the sink strainer plug measures 78mm in diameter at the top flat surface, which should snuggly fit into the plug hole, therefore your plug hole diameter should measure 78mm to fit properly. Measure your plug hole diameter by holding your measuring tape flat across the bottom of the sink.

Are all kitchen sink plugs the same size?

Standard size sink plugs are 1 3/4 inch for kitchen sinks and baths and 1 1/2 inch for bathroom sinks. Sink plugs are still available in 1 inch, 1 1/4 inch, 1 3/8 inch, 1 5/8 inch, 1 7/8 inch, 2 inch, 2 1/4 inch, 2 3/8 inch and 2 1/2 inch. You can often use a standard plug in your basket strainer waste.

What is the standard size of a kitchen sink?

The most common sizes for a kitchen sink are 30″ or 33″, however a standard size could measure anywhere between 24″ and 36″ in length. The bulk of what you find while shopping will fall within this size range. Generally, sinks up to 30″ will contain one large single bowl.

Are all plug holes the same size?

While a bathroom sink’s design and overall size may vary from one model to the next, the drain holes are fairly standard, 1.25 inches being a general standard.

Why does my kitchen sink plug not work?

The reason our sink plugs wouldn’t hold water was because the rubber washer underneath needed to be replaced. You can pull apart the plug by untwisting the middle handle part, which allows you to replace the rubber washer underneath. This is the seal that allows the plug to stop water going down the drain.

What is the purpose of a sink strainer?

In plumbing, a sink strainer is a type of perforated metal sieve or mesh strainer used to strain or filter out solid debris in the water system. Different varieties are used in residential premises and for industrial or commercial applications.

What is the standard size for a sink plug?

The standard plug For the home that does have a normally sized plug, you’re looking at 1.75 inches for the kitchen, and 1.5 inches for the bathroom. Bathroom showers and bathtubs may have different sizes, too.

What can I use as a sink plug?

A plastic bag filled with water and sealed makes a quick drain plug. Use a storage or sandwich bag and fill it with water, closing the seal. You can also tie a plastic bag that doesn’t seal by wrapping a rubber band around the ends to keep it closed. Set the water-filled bag directly over the drain and fill the tub.