How do you reset the check engine light on a Chevy Cruze?

If You’ve fixed the basic cause of the light illuminating, such as a loose gas cap, You can simply put the key in the ignition, and crank the engine. Once Your vehicle has started, turn it back off. Now, repeat turning Your car engine on and off two more times.

What is code 82 on Chevy Cruze?

In this case, a Code 82 on my Chevrolet Cruze means I’m in need of oil maintenance / oil change. If you have this code flash up on your dash be sure to contact your local dealership to correct any possible issue.

How do you clear the code on a Chevy Cruze?

Make sure the car is turned off. Plug in the scanner into the port. Ensure it is in snuggly. Turn on the car….Follow these steps:

  1. Figure out what the error code is.
  2. Fix the problem.
  3. Turn the vehicle on for a minute. Then, turn it off.
  4. Do this three times in a matter of a few minutes.
  5. That resets the code.

What is Code 82 in a car?

Code 82 is the oil change maintenance code.

What does code 89 mean on a Chevrolet Cruze?

The 89 code is not used in the U.S. but it is the ‘Change Oil’ code and must be reset when the service takes place……the car does not actually know you changed the oil.

How do you reset the computer on a 2011 Chevy Cruze?

To reset the Chevy Cruze computer You have two options. You can pull the battery cable and leave it off for about an hour. Or You can pull the fuse. To get to the fuse box look to the left of the steering wheel look for a small seam or crack along the dash.

Is there a way to reset the check engine light?

Simply place your key into the ignition and turn it on for 1-2 seconds, then turn it off for 1-2 seconds. Repeat this step three or four times. If the check engine light remains after the reset, you might still have a problem with your vehicle.

What’s a code 82 on a Chevrolet Spark?

Code 82 in the 2014 Chevy Spark corresponds with the oil change maintenance code. Keep pressing the set button until the oil life is set to 100 percent. The maintenance schedule for the oil and oil filter is every 7,500 miles. Both should be checked at this interval and changed if needed.

What is code 136 in Chevrolet Cruze?

If You have a code 136 then that means that there is a problem with the parking sensors. Code 136 in a chevrolet cruze is related to the parking sensor having a failure.