How do you subnet a Class C address?

Example: A class C network would have a subnet mask of 255.255. 255.0 which means that 24 bits are used for the network. In CIDR notation this is designated by a /24 following the IP address.

What is IP address explain subnetting with example?

As a basic definion, Subnetting is dividing the network into smaller network groups and by doing this, using the IP Address Block more efficient. For Subnetting, Subnet Masks are used. Subnets masks are 32 bit addresses like IP Addresses. Subnet Masks are used with IP Addresses.

What is the subnet mask for a Class C IP address?
Class C networks use a default subnet mask of 255.255. 255.0 and have 192-223 as their first octet.

Can I create 64 subnets of Class C IP?

Answer: 256-192=64 (the first subnet)64+64=128 (the second subnet)64+128=192. However, although 192 is the subnet mask value, it’s not a valid subnet. The valid subnets are 64 and 128.

What is the range of class C address?

Designing Your IP Addressing Scheme

Class Range Network Address
A 0-127 xxx
B 128-191 xxx . xxx
C 192-223 xxx . xxx . xxx

How many IPS are in a class C subnet?

IP address classes

Class Leading bits Addresses per network
Class A 0 16,777,216 (224)
Class B 10 65,536 (216)
Class C 110 256 (28)
Class D (multicast) 1110 not defined

What is subnetting explain?

Subnetting is the strategy used to partition a single physical network into more than one smaller logical sub-networks (subnets). An IP address includes a network segment and a host segment. Subnetting helps to reduce the network traffic and conceals network complexity.

What is class in IP address?

An IPv4 address class is a categorical division of internet protocol addresses in IPv4-based routing. Separate IP classes are used for different types of networks. Some are used for public internet-accessible IPs and subnets, that is, those networks behind a router (as in classes A, B and C).

How do I know if my IP is Class AB or C?

How to identify the IP class from a given IP address?

  1. If it begins with 0, then it’s a Class A network.
  2. If it begins with 10, then it’s a Class B network.
  3. If it begins with 110, then it’s a Class C network.
  4. If it begins with 1110, then it’s a Class D network.
  5. If it begins with 1111, then it’s a Class E network.

How many hosts are in a class C?

A Class C address consists of a 24-bit network address and an 8-bit local host address. The first three bits in the network address indicate the network class, leaving 21 bits for the actual network address. Therefore, there are 2,097,152 possible network addresses and 256 possible local host addresses.

How many subnets are in a class C?

255.224. The three bits added to the network part from the host part in the last octet can have eight possible values. Those eight possible values are 000, 001, 010, 011, 100, 101, 110 and 111. That means, we get eight subnets if we do a 3-bit subnetting for a Class C network.

How to subnett a Class C IP address?

Let’s take a class C IP address- Here /24 represents no of 1s (Network Part) in the IP address. It is also called CIDR Value. So we have 32-24=8 bits in which we can do subnetting. There are 4 main things to consider in subnetting.

How many subnets are there in a Class C network?

We have two subnets, so first subnet will start from and will end at because there could be only 128 hosts (IP Addresses) in a subnet. In each Range there will be a network address that will represent complete network for that subnet and there will be some broadcast address.

Which is the best example of subnetting worked?

Here are a selection of worked examples to help you get started. At the end are some links to online quizes so you can do it yourself. 1- You have been allocated a class A network address of You need to create at least 20 networks and each network will support a maximum of 160 hosts. Would the following two subnet masks Work?

What is the IP address of a subnet?

In each Range there will be a network address that will represent complete network for that subnet and there will be some broadcast address. Those addresses will always be first and last IP address of the range. Network Address: Broadcast Address: