How does a box joint jig work?
It functions like a double-bar miter gauge: the sled supports your workpiece while cutting pins and slots so you can slide it over the bit accurately. These keys, when used with router bits of matching diameters, enable the jig to cut three sizes of box joints with minimal changeover.
Are box joints strong?
Because the fingers multiply the gluing surface area, box joints are super strong, making them the perfect choice for utility boxes and tool chests.
What are box joints used for?
The glued box joint has a high glued surface area resulting in a strong bond, on a similar principle to a finger joint. Box joints are used for corners of boxes or box-like constructions, hence the name.
How deep should box joints be?
Generally, this joint looks best (and is strongest) when the thickness of the fingers is equal to half the thickness of the material. For example, if the stock used is 3/4 in. thick, the fingers should be 3/8 in. thick.
How tight should a box joint be?
Test-fit the joint. The pins and sockets should slip together easily, without binding, but also without gaps. A dry fit that requires firm pressure is too tight; the pieces will be tough to assemble after glue is applied, because the glue causes slight swelling.
Are dovetails stronger than box joints?
Frid wrote that finger (or box) joints are stronger than through dovetails because the fingers offer much more glue surface.
What is rabbet joinery in woodworking?
One of the first joinery cuts that new woodworkers try is the rabbet. A rabbet is simply an open-sided channel or recess along the edge or across the end of a board or panel. Easy to cut, it helps locate parts during assembly, and it provides more of a mechanical connection than does a butt joint.
What is a box joint?
Box joint. A box joint, is a woodworking joint made by cutting a set of complementary, interlocking profiles in two pieces of wood, which are then joined (usually) at right angles, usually glued.
What is a finger box joint?
A finger joint is a great way to join the sides of a case, box, or cabinet together. It is also a common method of fixing chairs and tables. In woodworking, it is an excellent way to attach wooden sides, when other kinds of joints would not provide enough surfaces for gluing.
What is jig making?
A jig used in making jewelry, a specific type of jig, is a plate or open frame for holding work and helping to shape jewelry components made out of wire or small sheets of metal. A jig in the jewelry making application is used to help establish a pattern for use in shaping the wire or sheets of metal.