What does E1 F1 mean on a Whirlpool oven?

Electronic control board malfunction
The “E1 F1” fault code indicates an Electronic control board malfunction. This means that the control board will need to replaced.

How do I fix F1 error on my oven?

Power Reset Disconnect the power to the oven and wait 5 minutes. Reconnect the power and reset the clock, then select a basic cooking program and touch “Start.” If the error does not return, continue using your oven as normal.

How do I clear the error code on my Whirlpool stove?

Plug the oven power cord back in or turn ON circuit breaker. Press CANCEL on the display. If fault code comes back after 1 minute then replace the keypad. If F2 E0 persists then replace the electronic oven control.

How do I clear my E1 F5 Whirlpool oven?

You should disconnect power again for 15 seconds and reconnect and see if that helps. If it doesn’t cure the E1- F5 error hold the bake button in until E0- F2 appears in the display. This is the error for a stuck button on the keypad and is the way to clear the memory of the electronic range control.

How do I fix F1 error on Whirlpool oven?

F1 Error Code There may be an analog to digital failure; if this is the case, simply disconnect the range for 30 seconds and plug back in. If the same display reappears, you may need to replace the control board.

What is f2e1 error code?

F2-E1 – Touch Pad Cable Unplugged – Check the connection between the touch pad (keypad) and control board (clock) to make sure it is secure. If error code reappears then replace the touch pad, or touch pad and control board (clock) if all one assembly.

What does F1 error mean?

These errors generally mean the control board has failed in one or more ways. F1 is by far the most prevalent. When this happens you need to replace the control board.

How do I fix F5 error on Whirlpool oven?

Persistent F5 Errors Press and hold any key for one minute to clear the error code, and an F2 code should appear. Press CANCEL and observe the stove for one minute to see if the F5 error reappears. If the error persists, it’s time to replace the latch.

What does F5 mean on my Whirlpool oven?

The F5 on most Whirlpool ranges will indicate that you have a problem with the oven door latch assembly or the oven door switch. If this switch is apparently operating properly then your failure is likely in the door latch assembly that normally locks the door before the clean cycle starts.

How do I fix error code f2e1?

F2-E1 – Touch Pad Cable Unplugged – Check the connection between the touch pad (keypad) and control board (clock) to make sure it is secure. Select the ‘cancel’ function and wait 60 seconds. If error code reappears then replace the touch pad, or touch pad and control board (clock) if all one assembly.

What does F1 on a stove mean?

Answered in 30 minutes. Generally speaking “F1” implies an electronic oven control (EOC) failure, however it’s possible to have a bad oven temperature sensor probe (RTD sensor) causing the “F1”.

How do you fix a whirlpool self cleaning oven?

Wipe out the oven with a damp sponge to remove any ash residue left from the cleaning process. If any stuck-on debris remains, scrub it with an abrasive steel wool soap pad. A mild-abrasive cleanser or a bit of oven-cleaner spray can help lift stubborn debris. Replace the oven racks and continue with normal use.

Why is my Whirlpool oven locked?

The oven may sometimes lock down if experiencing a power surge or similar electrical problems. Additionally, check that a fuse hasn’t been blown in your home’s fuse box. Some older homes may not have the proper wiring to support a high-powered appliance such as a Whirlpool oven.

What does the E1 F5 error code mean?

According to this link, a F5 E1 error code is a lid lock fault. This is the quote from the page regarding the error code. F5 E1. Lid switch fault. Check/Repair. This code is displayed if Start is pressed with the lid open. If the lid switch on the lid lock/switch assembly isn’t detecting the condition of the washer lid properly, then the lid lock/switch assembly will need to be replaced.

What does Whirlpool Cabrio F1 error code mean?

Whirlpool Cabrio Washer Error F1. The Cabrio Washer F1 error code happens when the main control board gets a bad signal from the water level pressure switch circuit. This is normally caused by a pinched or ripped water level pressure switch hose. Steps to take to try and remedy this error are listed below.