What is the difference between barge board and fascia?
Bargeboards and fascia boards are essentially the same thing. They are both long, straight boards that run along the lower edge of the roof. However, fascia boards run horizontally, carry the gutters and support the bottom row of roof tiles. Bargeboards run diagonally and are located at the gable end of a property.
What is a barge board used for?
Bargeboard (probably from Medieval Latin bargus, or barcus, a scaffold, and not from the now obsolete synonym “vergeboard”) is a board fastened to the projecting gables of a roof to give them strength, protection, and to conceal the otherwise exposed end of the horizontal timbers or purlins of the roof to which they …
What are barge boards and soffits?
Bargeboard. This is the board that is used on the gable end of a house. The condition of the bargeboard can often make or break the look of a house, and over the years it has evolved into some very attractive shapes. Soffit. The soffit board is tucked away under the fascia board.
What is barge fascia?
What are Bargeboards? A Bargeboard are also known as verge boards. They are the board that is fastened to the projecting gables of a roof. These provide strength to the roof and protect the otherwise exposed ends of timbers which are attached to the roof.
What is the board under the gutter called?
The fascia board is the long wooden board behind the gutters on a house. It connects to the roof rafters, closes off the attic and serves as the mount for gutters.
What is the underside of a roof overhang called?
soffit
The underside of this overhang, when given a finished appearance, is known as the soffit, which means “something fixed underneath”. The soffit is basically, any finishing material, such as wood or fiber cement, that is installed to cover the underside of your roof overhang.
Where is the barge board on a house?
gable end
What is a bargeboard? Bargeboards refer to the fascias located at the gable end or side of a roof. Used to protect the roof timbers of a building, bargeboards can also have a significant impact on the general aesthetics of the exterior of your property.
Do I need barge boards?
If you have a gable end (the triangular front or back of a house), you will have a bargeboard. This can often be decorative but basically maintains the look of the fascia and protects the support of the roof.
What are barge boards on a roof?
Long, straight boards fitted in an inverted V-shape to the gable end of the roof of your property, bargeboards protect the exposed ends of the roof rafters. Much longer than fascias, new bargeboards keep damp out and prevent damage caused by wind and rain.
What is the difference between fascia and eaves?
Eaves—The lower edge of a roof (often overhanging beyond the edge of the house). Fascia—A decorative board extending down from the roof edge either at the eave or at the rake.
What is the area under a roof called?
Soffit
What Is a Soffit? Your roof by necessity, will often times extend over the walls of your home. This overhang can go by a few names, such as the house eaves or the rafters of your roof. The underside of this overhang, when given a finished appearance, is known as the soffit, which means “something fixed underneath”.
What are the boards on a roof called?
Sheathing: The boards or sheet materials that are fastened to rafters to cover a house or building. Soffit: The finished underside of the eaves.
Is it OK to put new barge board over old barge board?
Maintaining your barge boards is simplicity, but a common mistake is simply placing new boards over old. This simply accelerates the deterioration of the board (in the case of wooden boards), and possibly the fascia too. What are Fascias? Fasc ias run horizontally along the roofline and can be made from either plastic or wooden boards.
What’s the purpose of barge boards on a roof?
Of course, this is intentional since the primary purpose of bargeboards is to make that part of the roof / building look better. Of course, they also serve a more practical function in that they cover any exposed materials and help protect them. Normally made from wood, they can be matched in colour and pattern in order to suit the home.
What are the different types of barge boards?
There are different types, naturally, such as square, bullnose and flat. Materials available are wide and varied so you will never be stuck for choice. Maintaining your barge boards is simplicity, but a common mistake is simply placing new boards over old.
Why are fascias, soffits and barge boards important?
Because they hold the gutters and protect the edge of the roof, it’s also important that your fascias, soffits and barge boards are well maintained. One common problem faced on properties with soffits is swallows nesting within the enclosure between the soffit and the house wall.