Why is RPWFE so expensive?
Water filter system requires RFID-chipped part It has an RFID chip, which the fridge uses to verify the authenticity of the part. The RPWFE filter costs much more than unapproved filters: about $50 compared to $13.
How long does a GE Rpwfe water filter last?
Easy Filter Replacement – You don’t need any tools or to turn off the water to replace these cartridge filters inside your refrigerator. Six-Month Filter Life – For best filtration results, filter cartridge should be replaced every six month or 300 gallons of water filtration.
How do I reset my RFID chip?
-The easiest way to kill an RFID, and be sure that it is dead, is to throw it in the microwave for 5 seconds. Doing this will literally melt the chip and antenna making it impossible for the chip to ever be read again. Unfortunately this method has a certain fire risk associated with it.
What happens if you don’t change the water filter in your fridge?
Failing to change your fridge’s water filter can cause scaling and deposit buildup in the water and ice machine, which can seriously damage your fridge. This buildup tends to slow down the system, causing low flow, and negatively affects the flavor of your water.
What is Rpwfe filter?
General Electric uses the RPWF water filtration system in their side-by-side and bottom freeze models of refrigerators. These filters use carbon block technology to filter out contaminants such as dirt, sand, lead, chlorine, and more. This system effectively filters over 97% of harmful toxins from your drinking water.
Can you use a RPWF instead of Rpwfe?
If your refrigerator specifically requires the RPWFE filter you will not be able to use the old RPWF cartridge, or an aftermarket replacement for the RPWF. The GE RPWFE filters are different than the RPWF filters.
How long do RFID chips last?
The lifespan of an RFID tag depends on many factors. If the antenna and chip are exposed to harsh chemicals or high levels of heat, it might not last for very long. But under normal conditions, most tags can function for 20 years or more.
Where is the RFID chip on a water filter?
Unpeel the label that says “back” and on the plug you’ll see a small depression where the RFID chip is situated. It’s lightly glued to the plug, so take a small sharp knife and very carefully pry it off, then tape the chip directly to the filter compartment near where it would sit if it were on a filter. That’s it.
What’s the difference between GE rpwfe and RPWF?
The difference between the the two parts goes beyond the “E” at the end of the part number. Newer GE refrigerators “use radio frequency identification (RFID) to detect leaks and monitor filter status.” This means the RPWFE filter contains a chip which “talks” to the fridge to let it know that it’s a genuine factory product.
How can I change the rpfw filter chip?
It’s lightly glued to the plug, so take a small sharp knife and very carefully pry it off, then tape the chip directly to the filter compartment near where it would sit if it were on a filter. That’s it. Now you can buy generic $15 RPFW filters on Amazon and eBay and change them whenever you want.
What’s the difference between rwpf and rpwfe water filters?
You see, GE made a recent change to their water filters. GE fridges used to use RPWF filters. But my fridge requires RPWFE. Um Jack…. What does the E stand for? Great question reader. I’m glad you asked! It’s EVIL. The E stands for evil. The difference between RWPF and RPWFE is that the RPWFE has a freaking RFID chip on it.